tap

(redirected from transceiver)
Also found in: Dictionary, Thesaurus, Medical, Acronyms, Encyclopedia, Wikipedia.

tap

  1. a FINANCIAL SECURITY such as a government STOCK which can always be obtained on demand because there is continuous supply
  2. the issue of TREASURY BILLS and government BONDS which are sold directly to government departments as opposed to being sold on the open market.
Collins Dictionary of Business, 3rd ed. © 2002, 2005 C Pass, B Lowes, A Pendleton, L Chadwick, D O’Reilly and M Afferson
References in periodicals archive ?
The general power consumption of CWDM4 optical transceivers produced in volume is almost less than 3.0W; the margin of optic eye diagram is higher than 20%; the receiving sensitivity of RX light is higher than -10dbm under 1E-5BER; the jitter rms is less than 2ps.
QSFP, QSFP+, QSFP14, and QSFP28 form factors collectively hold largest share of optical transceiver market
Find more information on the mmWave Transceiver System and configurations at www.ni.com/sdr/mmwave.
Introduction of Transceiver Industry: Along with Brief Introduction of Transceiver Industry it includes Development of Transceiver Industry and Status of Transceiver Industry.
CAN FD nodes with configured data-phase bit-rate of 1 or 2 Mbit/s should use transceiver chips compliant to ISO 11898-2:2016 qualified for 2 Mbit/s.
Before a CAN transceiver is used in space applications, it must meet the key electrical specification of the ISO 11898-2 standard.
The classification of the transceivers within the Federal Logistics Data (Fed Log) was changed to class IX by the project manager in the logistics support activity.
The transceiver is a configurable building block within the sensor chain, capable of instantaneously capturing signals over a 1 GHz range, with two, high resolution 12bit input and two 14bit output channels.
Mantis GT also introduces loop delay symmetry, a new parameter which guarantees the integrity of CAN communication is preserved at higher speeds, resulting in a transceiver that is optimized for data rates of 2 Mbps and over.
(FSWP), Tempe, Ariz., has introduced the MB86L13A LTE (FDD and TDD) optimized transceiver. The new transceiver has been developed for LTE- only applications and features the architecture pioneered by Fujitsu that eliminates the need for external low noise amplifiers (LNAs) and inter-stage surface acoustic wave (SAW) filters.
Contributors from US and European universities and companies examine novel transceiver concepts for multi-mode/multi-band cellular systems from the antenna to baseband, with special attention to integrating digital signal processing capabilities implemented locally on the radio frequency integrated circuit.

Full browser ?