Off Center

(redirected from off-center)
Also found in: Dictionary, Thesaurus, Legal, Idioms, Encyclopedia.

Off Center

In numismatics, describing a coin on which a mistake was made in the striking such that the inscriptions are not centered properly. Because off center coins are somewhat unusual, they may be valuable, though they are illiquid assets.
References in periodicals archive ?
Off-Center's first foray with immersive theatre was a production of Sweet & Lucky, created by Third Rail Projects of Brooklyn, N.Y.
Consequently, we can approximate that [F.sub.c] is 5 and 10 to 20 times stronger at the edge of the conventional spin-coated samples and in the off-center spin-coated samples relatively to the central part of conventional spin-coated samples, respectively.
The company notes that off-center necks usually require a ramdown neck finish--but this is incompatible with standard dairy industry capping.
Even at this stage, off-center spin coating produced transistors with a range of speeds far above those of previous organic semiconductors and comparable to the performance of the polysilicon materials used in today's high-end electronics.
offers the new HRT320FB face gear rotary table to provide extreme rigidity and high brake torque for heavy off-center milling, drilling or tapping operations.
With some subtle suggestions from a slightly off-center English teacher, both Casey and Stew find themselves smitten with love interests who appear to be perfect.
The neighborhood has been transformed into an exciting, albeit slightly off-center, college town lined with fashion and luxury boutiques galore.
This minimizes the chance of damage to the drive system that could result from forces created by excessively heavy or off-center loads.
As the film opens we see Barry at a desk in an off-center, color-coordinated composition, making a phone call from his San Fernando Valley warehouse office (a "novelty" toilet plunger business) to verify the rules of a frequent-flier cross-promotion.
Delphi reports that solid air tubes had typically been off-center by 2[degrees] to 3[degrees], as compared with around 0.5[degrees] variance for microcellular foam versions.
Off-center drilling, cross milling and cross rigid tapping at an angle are possible.
In the November PHYSICAL REVIEW E, the researchers report that the funneled sand, which flows onto a small section of the mounting heap, consistently produced piles with off-center maximum pressure.