Cycle

(redirected from machine cycle)
Also found in: Dictionary, Thesaurus, Medical, Legal, Acronyms, Encyclopedia.

Cycle

References in periodicals archive ?
(2) [A.sub.ij] is braiding matrix; it represents the yarn carriers arrangement after i + 1 machine cycles and j steps, i = 0, 1, 2, 3, 4, 5, 6 ..., j = 0, 1, 2, 3, 4.
If the circuit designer is also the machine cycle designer, or has inputs into the machine cycle design, he may have an opportunity to manipulate machine functions which yield a hydraulic system profile that will optimize energy efficiency.
The actual completion of the primary function of that machine--in this case, the printing of solder paste--is generally additive to the accepted elements that define machine cycle time.
Features a new runner block that can help machine builders shorten machine cycle times, increase production and reduce lubrication and maintenance costs Contact: Susan Baker, 1-704-583-4338
All tools are readily available to the robot during each machine cycle to maximize efficiency as it switches between drilling holes, cutting panels and trimming the perimeter of the composite parts.
Post-machining quality control can be performed while maintaining machine cycle times, with parts clamping, orientation and quality assurance accomplished with the machines running.
In addition the P89C66x line achieves, according to the company, a 2x performance improvement over standard devices by supporting six clocks per machine cycle. The new microcontroller family is available immediately but pricing was not disclosed.
color touch-screen that displays rpm, weld mode, weld distances, hold, time, pressure, part count, and total machine cycle count.
Omron says tests carried out have confirmed that the FH vision system is the fastest of its type currently available, which means that users can achieve shorter machine cycle times combined with precise and dependable operation, even in difficult operating conditions.
The carrier is injected and then foamed in place with thermoplastic elastomer in one total machine cycle. The Dolphin method is said to represent an economical alternative for the production of hard/soft components in comparison to other conventional multi-component and foaming methods.
The SFM 5110 processes two or five syringes or vials at each machine cycle. Depending on the equipment fitted and the desired degree of automation, the feed and removal of the nests can be manual or fully automatic.
An automatic carriage locking system is installed for 'Health & Safety' purposes should the machine cycle be interrupted at any time, or for safe working during routine maintenance for example