Ground

(redirected from grind)
Also found in: Dictionary, Thesaurus, Medical, Legal, Idioms, Encyclopedia, Wikipedia.

Ground

A customary unit of area approximately equivalent to 203 square meters. It is used in real estate transactions in some parts of India.
References in classic literature ?
Tom waited till a late hour, to get a place at the mills; and then, moved by the utter weariness of two women, whom he saw trying to grind their corn there, he ground for them, put together the decaying brands of the fire, where many had baked cakes before them, and then went about getting his own supper.
But then it must be a prudent king, such as is able to grind with a handmill; and those inward counsellors had need also be wise men, and especially true and trusty to the king's ends; as it was with King Henry the Seventh of England, who, in his great business, imparted himself to none, except it were to Morton and Fox.
Heavy-duty central granulators for thick-walled parts, pipe and purgings include units able to grind up to 6500 lb/hr.
These days, anyone who touches a rail down on a grind going in is hailed as doing a Smith grind.
There's nothing that aggravates tooth wear more than trying to grind dirt," he says.
You can grind right into the coloring machine if they have a coloring machine that can keep up with the grinder output.
Because the FC51 is a multi-axis CNC machine, and because the flute-grinding spindle operates at a higher rpm than previous dedicated operation machines, it can grind both flutes and clearances in less overall cycle time than two dedicated machines can do the job.
The report also reveals that about half these people grind so much that they have jaw pain or tooth damage that requires dental work.
The wet fine grind process is unique in that very intense and rigorous cutting paths are required for the particle to travel while being reduced.
In a production application on 6mm diameter X 2-flute high-performance tungsten carbide drills, G-Force wheels were used to grind flutes @ .
For ID grinding, the ideal solution is to turn the heavy stock, and then leave a minimum of material for the finish grind.