end cap

end cap

In a strip shopping center (long and rectangular with large amounts of road frontage),the retail space at either end is called the end cap.Chain restaurants usually desire freestanding space, but will accept end cap. Any establishment requiring a drive-through window, such as a fast-food restaurant,dry cleaning store,or bank,will need end-cap space.

References in periodicals archive ?
4/0217539/0 -Torsion Coupling, EMCO clutch coil plate full set for c1/3 card EMCO Clutch Plate only for c1/3 card EMCO clutch coil only for c1/3 card Star washer valcoline polyp propoline white,Scraper blade for DK 800 cards Grease nipple with cover complete set for DJ50,Ring Frames,Green clearer cloth,Ring frame pneumafil end cap
The slide hammer has to fit over the tube but not the end cap.
Zeiger addressed that by developing a two piece end cap in which only the insert is made of the expensive material--either Inconel 625 or Hasteloy C276--with the housing being made from a much lower-cost tool steel.
A stainless steel end cap model that is available in 7 bore sizes and lengths up to 50".
Slide two fascia support brackets onto the gutter (Photo 2) and glue the other end cap into place.
With its newly designed End Caps, included with each unit, the Super Tile Divider can be used on a standard, recessed or mini grid, and is attached to the ceiling by inserting the fin of the End Cap between the grid and the tile divider.
Evenflo has also received a report of a dislodged end cap that resulted in a child suffering a broken collarbone in Canada.
This cover arrangement consists chiefly of an end cap (12), a counter pressure disk (14), a sealing element (16) and a tension lock not depicted in this figure, which is arranged at (18) in the central area of end cap (12) and counter-pressure disk (14).
has introduced its Servo-Flo 608 meter system designed to meter mix and dispense two-component materials for high speed filter end cap molding applications.
Wix has also removed the center cone in the end cap of the air filter.
Rotate the end cap clockwise for a constant beam or press the end button for a flashing light.