Cunningham, "Measurement of bolt preload in torqued composite joints
," Strain, vol.
Test specimen CBJ4 was a composite joint
with an RC slab of 100 mm in thickness and web anchorage plates of the stiffening type, and the failure modes are shown in Figure 13.
(1) A progressive damage model based on Chang-Lessard criterion was implemented using UMAT subroutine of ABAQUS/standard to predict damage initiation, evolution, and ultimate failure of single-lap double-bolt composite joint
. Seven modes of failures are captured to forecast the internal damage of the composite laminates.
Li, "Process parameters design of a three-dimensional and five-directional braided composite joint
based on finite element analysis," Materials & Design, vol.
The main parameters of the composite joint
included the type of the two web anchorage plates and the extension length of the vertical plate, as shown in Figures 3 (d)-3(f).
Taikoo Spirit is a composite joint
venture between HAECO and Spirit AeroSystems, Inc.
Fatigue and Fracture of Adhesively-Bonded Composite Joints
: Behaviour, Simulation and Modelling
, indicated that the improvement in mechanical properties of the SAC-Ni coated CNTs composite joints
over the monolithic SAC solder joints can be attributed to the following mechanisms which was also indicated in the investigations of Goh C.S.
The topics include stress and strain analysis of symmetric composite single lap joints under combined tension and in-plane shear loading, modeling cylindrical joints with a functionally graded adhesive interlayer, testing dual adhesive ceramic-metal joints for aerospace applications, modeling composite sandwich T-joints under tension and bending, and detecting interface failure in adhesively bonded composite joints
using a novel vibration-based approach.
Mechanical joints: X-Calibur is supplying extruded aluminum and composite joints
to several prestigious projects in Dubai and has already begun local manufacture at its Sharjah manufacturing facility.
Recent years have seen an increased use of bonded composite joints
in various applications (e.g.
The 4th European Congress on Adhesive and Sealant Raw Materials will feature "Innovative Raw Materials for Structural Adhesives." The congress, to be held April 27, is designed to create dialogue between manufacturers of raw materials, adhesives, and sealants while focusing on "sticking" as a multifunctional jointing technique for the rational production of composite joints
of different materials with exceptional properties.