Acoustic design: Closed | Weight: 0.64 lbs (289g) |
Cable length: N/A | Frequency response: N/A | Drivers: 40mm | Driver type: Dynamic | Sensitivity: N/A | Impedance: N/A | Battery life: 24 hours | Wireless range: 100 meters (330 feet) | NFC: No
The control path, the
cable length measured by the cable-length sensor, and the control tension are shown in Figures 9-14.
Figure 6 shows that the oscillation magnitude of [omega][Z.sub.drive] reduces significantly with the increase of
cable length. Since the magnitude of induced common mode voltage is directly proportional to [omega][Z.sub.drive], as suggested in Equation (6), the effect of the
cable length cannot be neglected.
Various
cable length are required: Curl fiber cable can reduce the fiber cables needed in application where different
cable lengths are needed, as one cable can be stretched or shrunk in different
cable length, and reduces the issues of not have the correct
cable length.
For larger complexes, with more servers and more I/O, the capability to extend
cable length to 15 meters is essential.
A
cable length of 12" is standard and adjustable lengths are customizable for special applications.
The seals'
cable length can be customized; standard
cable length for the Quick Loc Seal is 14 inches, while the length for the Quick Loc Seal plus is 18 inches.
The
cable length and connector type can be individually selected while the connectors can be equipped with an optional TEDS chip for storing sensor data.
The MicroScanner2 Cable Verifier displays
cable length, wire map, cable ID and distance to break or short as visual representations on a single screen.