Caption: Figure 10: The

relative permeability resistance (R) of specimens with PSS concentrations of 1%, 3%, and 5% at different curing times.

What is more, the water/oil

relative permeability curves were correlated with the capillary number and fluid saturation.

The dispersion characteristics of the relative permittivity [[epsilon].sub.r], the

relative permeability [[mu].sub.r], the relative impedance [[eta].sub.r] and the refractive index n of the atomic vapor driven by the incoherent pump field (for high-gain amplification) and the strong coupling field (for generating dressed states).

Reservoir wettability is implemented in the numerical model by changing

relative permeability and capillary pressure curves simultaneously.

[k.sub.n]:

Relative permeability of native fluid (dimensionless)

where [k.sub.r,w0] is the

relative permeability of the water phase endpoints, [k.sub.r,g0] is the

relative permeability of the gas phase endpoint, [S.sub.r,w] is the residual saturation of the water phase, [S.sub.r,g] is the residual saturation of the gas phase, and [lambda] is a parameter that represents the pore structure characteristics of porous media.

Relative permeability curves are obtained from waterflooding in Weyburn field (Figure 3) [26].

According to the above equations, the

relative permeability can be expressed as a function of tortuosity ([tau]) and volume fraction of the silicate layers ([empty set]) [31]:

Seo, "High-efficiency wireless energy transmission using magnetic resonance based on metamaterial with

relative permeability equal to -1," Progress In Electromagnetics Research, Vol.

Here, to identify the functions of relative permittivity,

relative permeability, and chirality parameter of inhomogeneous chiral layer, their functions are considered as the following Fourier series expansions:

It will waste a lot of time and energy when we research the oil-water

relative permeability equations or the formation permeability distribution.

Ferrite has high

relative permeability, low magnetic loss, and high resistivity and therefore is suitable to be used for RF on-chip inductors in GHz working frequency.