Thus, it can be deduced that both HCl[O.sub.4] and K[H.sub.2]P[O.sub.4] were inserted into the interlayer of NFG; this process is a prerequisite for the preparation of EG.
But the content of Cl in EG decreases to 0.05% and P cannot be detected.
In summarizing the findings of Tables 5 and 6 (Appendix), it can be said that there exist significant positive effects of EG on HD and of HD on EG.
In other words, the empirical findings in this paper confirm the two-way relation between EG and HD by way of many, if not all, of those links that data constraints permitted.
Terminologies such as "preferential option for the poor" and "concern for the poor," so characteristic of liberation theology, abound in EG.
In missiological terms, one could observe that EG is talking about a "mission on behalf of the poor" or "mission for the poor" and not so much "mission by the poor" which TTL offers as a paradigm shift.
Pizza-nality: Meat feast eg.
Sloppy Giuseppe = Homebody, supportive, a follower Celeb fan: Joey Essex
Generally, the higher FPI and lower PHRR values mean that the better fire resistance can be obtained, which can reduce the loss and casualty in a real fire , This indicates that the flame retardancy of the HDPE/EVA blend is improved greatly by EG.
Moreover, HEEM2 has the highest FPI value among four samples, which means the best fire resistance is obtained for the composites with 6.7 phr RPM.
It is observed that the electrical conductivity of the composites increases with increasing the content of EG.
According to the DOE target, the value of electrical conductivity should be >100 S/cm, which is obtained in the composite sample prepared with 40 wt% of EG.
Comparing SEM picture of HDPE/EVA, the leaf-like structure disappeared for HDPE/EVA/EGI and HDPE/ EVA/EG2 owing to the addition of EG.
The lamellar structures of graphite could be observed easily.
In addition, MEG contains more polar groups than EG.
Hence, polymer chains can easily interact and penetrate into the gallery space of MEG than EG.
The process of air stripping can be visualized as a system in which there is diffusion, reaction, and generation of AA, 2MD, and EG.
The AA and EG are, respectively, generated by vinyl ester end group and polycondensation reactions.
It may caused by the comparative increase of additives (PEW) with the increasing of masterbatch contents which would lead to a decreased interfacial interaction between polymers and EG.
Tensile modulus curves in Fig.