# Control parameters

Also found in: Acronyms.

## Control parameters

In a nonlinear dynamic system, the coefficient of the order parameter; the determinant of the influence of the order parameter on the total system. See: Order Parameter.
Copyright © 2012, Campbell R. Harvey. All Rights Reserved.
Mentioned in ?
References in periodicals archive ?
Therefore, the evaluation of the effect of this change in the diametrical thickness t of the enamel on the breakdown voltage is crucial in selecting the control parameters and the required boundaries of the evaluation interval and is of great practical importance in the production conditions.
After the user rate and requested delay parameters were calculated, another parameter evaluated was the control parameter. This parameter provides a control for user selection by modifying the PF scheduler metric.
When the robustness control parameters [GAMMA] = 0, [GAMMA] = 10, and [GAMMA] = 20, each objective optimal distribution route for all vehicles from distribution centers a, b, c is shown in Tables 14, 15, and 16.
As shown by (45) and (46.a), (46.b), (46.c), and (46.d), the proposed optimization model solve the best control scheme by choosing the prime location of control stops ([[eta].sub.s]), and solving the optimal value of control parameters [f.sub.s] and holding slack time [d.sub.s] for each control stop.
The numerical values mentioned in the equations are the multiplying factors of time response specifications and are tabulated in Table 4 to respective control parameter.
(f) Determine the convergence control parameters, [c.sub.1], [c.sub.2], [c.sub.3], ..., by using one of the methods given in [8-11].
In practice, however, the control parameters of sigmoid-function method mostly come from the designer's personal experience and trials.
N1, N2, M1, M2, T1, T2 are the control parameters of the class function.
where [alpha], [beta], and [gamma] are control parameters and x is the state variable.
- IEEE 802.3by, Standard for Ethernet Amendment: Media Access Control Parameters, Physical Layers and Management Parameters for 25 Gb/s Operation, introduces cost-optimized 25 Gb/s PHY specifications for single-lane server and switch interconnects for data centers.
And, the new display shows test control parameters (spindle, speed) and measured values (% torque, viscosity).
The algorithms are evaluated based on criteria such as probability distribution, exploitation of positional distribution of agents, and number of control parameters. B&w images and charts are included.

Site: Follow: Share:
Open / Close