BH

(redirected from Brinell hardness)
Also found in: Dictionary, Thesaurus, Medical, Acronyms, Encyclopedia.
Related to Brinell hardness: Rockwell hardness, Vickers Hardness

BH

The two-character ISO 3166 country code for BAHRAIN.

BH

1. ISO 3166-1 alpha-2 code for the Kingdom of Bahrain. This is the code used in international transactions to and from Bahraini bank accounts.

2. ISO 3166-2 geocode for Bahrain. This is used as an international standard for shipping to Bahrain. Each Bahraini governate has its own code with the prefix "BH." For example, the code for the Capital Governate is ISO 3166-2:BH-13.
Mentioned in ?
References in periodicals archive ?
Static mechanical properties in terms of bending strength, compressive strength, and Brinell hardness of PIWs were greatly increased.
Minimal error in estimating Brinell hardness (HB) in the testing data set was 0.
A Brinell hardness test for eastern beech wood was done according to the Brinell-Morath method by following German Industrial Norm (DIN-Vornorm C 3011) (6).
That gives us the same approximate Brinell Hardness Number (BHN) as our castings when we check the end of the test bar.
0,2] = 225 MPa, Brinell hardness 400 HB, martensite [congruent to] 74 %, ferrite [congruent to] 26%) generally used for hydraulic turbine blades in our country and being considered with a good resistance to cavitation erosion.
Mine are poured of linotype alloy which is rated with a Brinell hardness number (BHN) of 22.
As an example, a 3-ft-dia by 2-ft-high flanged butterfly valve body arrives from Rodney Hunt's foundry as a high quality, 1300 lb iron casting rated at 180 Brinell hardness.
The test was carried out on a Brinell hardness testing device with a ball indenter diameter of (5mm) and load of (31.
Tenders are invited for Rockwell Cum Brinell Hardness Tester Model Se Rab-250 As Per Catalogue Attached Along With All Standard Accessories.
The advanced HR-500 Series Rockwell hardness testing machines offer multiple test force generation for Rockwell, Rockwell Superficial and optional Brinell hardness testing.
Q Our customer requires a Brinell hardness number (BHN) of 85 on an A356-T6 sand casting, and our tests show measurements as low as 57 under the riser.
Samples prepared by the process of cold rolling underwent the stress-strain testing and their Brinell hardness was measured.