Bonded

Also found in: Dictionary, Thesaurus, Medical, Legal, Idioms, Encyclopedia, Wikipedia.

Bonded

Describing any debt or liability on which payment is guaranteed by a bond.

References in periodicals archive ?

Another important reason to consider predominately Western Bentonite bonded sand systems is to improve casting quality and cleaning costs.

Forget Southern! Go Western with green sand binders

Polymer bonded magnets are said to give designers great freedom to create complex magnet shapes with virtually any pole configuration, according to the sponsor.

Polymer bonded magnets examined. (Meetings)

The EPRI Center for Materials Production has recognized the desirability of developing a thermal sand reclamation system that would operate at high temperatures and at high throughput levels suitable for processing both organically bonded and green sands.

Evaluating an infrared reclaimer for clay-bonded sands

acrylonitrile butadiene rubber (NBR), are bonded to metals or other substrates, isocyanates, either alone or in combination with substances such as chlorinated polymers, offer a broader range of applications.

Rubber-to-metal bonding agents

* Primary adhesion -- Bonded ASTM D429-B assemblies were pulled at a rate of 20 inches per minute at a 45 degrees angle.

Aqueous adhesives for bonding NBR to metal

With a tensile strength ten times that of steel, on a weight basis, there are numerous applications which could benefit from use of these fibers for reinforcement - if only they could be bonded to.

PU incorporating surface-modified particles, fibers

Rubber is often chemically bonded to metal and used in undersea applications.

Adhesives for bonding cathodically protected rubber to metal devices

Based upon test results of the many samples bonded with only a single adhesive system and aged at 158OF for one week, peel strengths quadrupled and shear strengths doubled with the use of a primer.

New adhesive, coating attack EPDM seam-weakness nemesis

At room temperature Alcryn can be bonded to metals at room temperature with second generation acrylic (SGA) adhesives, using the following procedure: