Skin

(redirected from skin effect)
Also found in: Dictionary, Thesaurus, Medical, Legal, Encyclopedia, Wikipedia.
Related to skin effect: Proximity effect

Skin

ISO 3166-3 code for Sikkim, which acceded to India in 1975. ISO 3166-3 codes are used to indicate names of countries that are no longer used.
References in periodicals archive ?
Owing to skin effect, higher frequency results in less current near the center of the cable and the internal inductance decreases.
Therefore, the frequency-domain skin effect impedance can be determined from
At the heart of the heating are two physical phenomena: the skin effect and the method of direct, discrete conversion of radiated electromagnetic energy into heat.
We demonstrated that in the latter case, the formation of higher order eddy currents, which lead to the well-known skin effect phenomenon, reduces the total torque and hence, the effective force applied over the ring surface.
In some published literature regarding proximity effect, such as IEC 60278-2002 (also, see the references cited in Chapter 1of this IEC standard), the proximity effect is separated from skin effect.
At microwave frequencies, however, dispersion, skin effect and other frequency-dependent losses must be modeled accurately to obtain useful simulation results.
The skin effect will keep you from getting zapped, even if you are standing on metal decking.
When SCSI transfer rate increases from 160MB/sec to 320MB/sec, the frequency components that carry the digital information are doubled, and the cable skin effect resistance is also increased.
Create the fashionable Back To Nature look with a couple of leopard skin effect lamps (pounds 30 each), teamed with some animal print throws (pounds 25-pounds 40 for safari or animal) or cushions priced at pounds 20.
And for those thousands of women who suffer from cellulite, they can help in the battle against the dreaded orange- peel skin effect.
In addition to the morphological characteristics of the core region, a significant skin effect was observed in the injection molded plates 1, 3, and 5 mm thick.
Tenders are invited for Electrical works (part a) and instrumentation works (part b) for laying of skin effect heat traced pipeline project (hsvr/lsvr/cgo pipeline project)