# Boundary Conditions

(redirected from boundary condition)
Also found in: Dictionary, Thesaurus, Acronyms, Encyclopedia, Wikipedia.
Related to boundary condition: Neumann boundary condition

## Boundary Conditions

The limitations to which a mathematical equation is subject under certain circumstances. Boundary conditions are important in solving problems dealing with real world issues.
References in periodicals archive ?
Still, if we know the position of the freezing front and boundary conditions, we can determine the temperatures in the two areas.
The vibrational modes contributing most significantly to the radiated sound of hand-bells, are the bending waves travelling along the bell surface with periodic boundary conditions in the angular direction, nearly clamped boundaries near the crown, and free boundary conditions at the mouth of the bell.
Boundary conditions can be divided into two categories: First, setting the boundary point part or all the value of the dependent variable, or the relationship between the dependent variable to reflect the impact of the computational domain Ministry, which is referred to as the physical boundary conditions (often referred to as the boundary conditions); Second, in order to determine the additional mathematical conditions for the remainder of the boundary points given dependent variable, reflecting the impact of computational domain, which is referred to as the numerical boundary conditions.
Other reviews of flow in porous duct tend to focus only on one specific aspect of the subject at a time such as membrane filteration [8], the description of boundary conditions [6] and the existence of exact solutions [7].
The Neumann boundary condition leads to a matrix A that is block Toeplitz-plus-Hankel with Toeplitz-plus-Hankel blocks (BTHTHB), and provided the kernel a is symmetric, i.
1995), "On boundary conditions for fluids of the differential type", in A.
In order to establish the boundary conditions for the CFD model the following parameters were measured:
There is a single boundary condition at the inlet ([[GAMMA].
If A, B, C coefficients obtained depending on the boundary conditions are used in Eq (1), the function of the curvature of any point on the transition curve can be obtained as Eq (5):
The boundary condition u = 0 on [delta]D, written in extend form, becomes a linear, omogen system:
Site: Follow: Share:
Open / Close